Process Dryer Rubber Content of Crumb Rubber Products is The Ideal For Exploitation on Dryer Temperature and Timer of Range
Abstract
Purpose: This study aims to analyze the drying factor (DF) of crumb rubber products based on dry rubber content (DRC), time, and dryer temperature. Methodology: The study employed a completely randomized design (CRD) with two factors: temperature (80°C, 90°C, 100°C, 110°C, 120°C) and time (2, 4, 6 hours), each with 3 replications, and a control (100°C for 2 hours). Results: The results showed a significant interaction between time and dryer temperature. Temperatures of 90°C (4-6 hours), 110°C (2-4 hours), and 120°C (2-6 hours) can replace the standard 100°C for 4 hours without significant differences in DF. Finding: A temperature range of 110°C to 120°C for 4 hours prevents deviations in DRC standards. Novelty: This study identifies flexible temperature and time ranges for DF standards in crumb rubber products. Originality: It updates crumb rubber processing standards for quality optimization. Conclusions: Precise DF determination with appropriate temperature and time is crucial for crumb rubber product quality. Type of Paper: Quantitative experimental research.
Downloads
References
Adril, A. R. (2021) Analisis Pola Pemasaran dan Stuktur Pasar serta Transmisi Harga Bahan Olahan Karet di Kabupaten Musi Rawas Sumatera Selatan Skripsi. Fakultas Pertanian. Universitas Sriwijaya. Palembang.
Alam, A., S. (2021). Penentuan Kadar Karet Kering dengan Metode Oven Gelombang Mikro. Buletin Engineering Pertanian. 6 (12).
Akli. K, (2023) Pengaruh Proses Pengeringan terhadap Nilai Plastisitas Retensi Karet Remah. Majalah Teknologi Industri. 20 (2).
Atagana, H. I., B. O. Ejechi, and A. M. Ayilumo. 1999. Fungi Associated with Degradation of Wastes from Rubber Processing Industry. Environmental Monitoring and Assessment 55(3): 401–8. http://link.springer.com/10.1023/A:1005935032014.Diakses tanggal 27 Maret 2024
Auria, R., J.C. (2020). Drying of Natural Rubber in Sheet Form Internal ... Structure and water Transfer. Journal Rubber Research. https://doi.org/10.3390/en15186564
Auria. R (2022). Drying of Natural Rubber in Sheet Form -Internal Structure and Water Transfer. Journal of Natural Rubber Research. Ohio State University. https://doi.org/10.1039/C7RA04770C
Azizi. M (2023). Pengaruh Bauran Pemasaran (Mix Marketing) terhadap Keputusan Pembelian Pakaian Merek Lokal dalam Perspektif Syariah (Studi di Cffnd Store Lamnhuk, Banda Aceh). Tesis. Program Studi Ekonomi Syariah Fakultas Ekonomi dan Bisnis Islam Universitas Islam Negeri Ar-Raniry Banda Aceh.
Badan Standardisasi Nasional. (2022). SNI 1903:2017 Tentang Karet Spesifikasi Teknis. Jakarta.
Badan Standardisasi Nasional. (2023). SNI 1903:2017 Bahan Olahan Karet. Badan Standar Nasional. Jakarta.
Damanik, S. (2022). Pengembangan Karet (Havea Brasiliensis) Berkelanjutan Di Indonesia. Analisis_Kelayakan_Investasi_Industri_Karet_Remah_Crumbrubber_DI_Wilayah_Barat_Provinsi_Aceh.https://www.academia.edu/125419184/.Diakses tanggal 25 Maret 2024
Direktorat Jendral Perkebunan (2021). Statistik Perkebunan Indonesia. Kementerian Pertanian, Jakarta.
Gunawan, A. (2020). Sapta Bina Usaha Tani Karet Rakyat. Balai Penelitian Sembawa Pusat Penelitian Karet. Palembang. https://repository.pertanian.go.id/server/api/core/bitstreams/22755238-e9be-4b5d-980d-ea794817b924/conten. Diakses tanggal 21 Maret 2024
Haiwong, D.R, (2020). Drying Kinetics of Unsmoked Rubber Sheet by Forced and Natural Convection. IEEE Colloquium on Humanities, Science and Engineering,CHUSER. https://www.researchgate.net/publication/269365768_The_Drying_Kinetics_of_Natural_Rubber_Sheets_under_HotAir_Drying_with_Forced_Convection_Experiments_and_Modeling. Diakses tanggal 23 Maret 2024
Hanifarianty. S (2021). Pengujian Kadar Karet Kering dengan Metode Hidrometri. Warta Perkaretan. 40 (1). https://Doi.Org/10.22302/Ppk.Wp.V40i1.763
Ikhsan, Sadik., Abdussamad, dan Purnomo, Joko. (2020). Analisis Kelayakan Pembangunan Perkebunan Karet Rakyat di Kabupaten Tanah Laut, KalSel. Jurnal Chlorophyl 6(3): 201-207. https://doi.org/10.22302/jpk.v0i0.229
Kementerian Lingkungan Hidup. 1995. KepMen LH No. 13 Tahun 1995 Tentang Baku Mutu Emisi Sumber Tidak Bergerak-Komara. http://komara.weebly.com/peraturan- lingkungan/kepmen-lh-no-13-tahun-1995-tentang-baku-mutu-emisi-sumber-tidak- bergerak.Diakses tanggal 21 Maret 2024
Najiyati, S., Danarti, Murdiatun, Damanik, L., Slamet R.T.S., dan Suwardin, D., (2021) Difusi Teknologi Pengolahan Karet Rakyat di Kawasan Transmigrasi Mendukung Koridor Ekonomi Sumatera. Jurnal Ketransmigrasian 29(1): 23-33. https://doi.org/10.22302/ppk.wp.v36i2.307https://doi.org/10.22302/ppk.wp.v36i2.307
Pemerintah Provinsi Jawa Tengah (2023). Peraturan Daerah Provinsi Jawa Tengah Nomor 5 Tahun 2012. http://elibrary.dprd.jatengprov.go.id/peraturan-daerah-provinsi-jawa-tengah-nomor-5-tahun-2012.Diakses tanggal 21 Maret 2024
PT Bukit Angkasa Makmur. (2024). Kenaikan harga karet di Bengkulu didorong faktor global, capai Rp28 ribu per kg. https://bengkulu.antaranews.com/berita/379072/kenaikan-harga-karet-di-bengkulu-didorong-faktor-global-capai-rp28-ribu-per-kg
Pusari, D. dan Haryanti. S (2023). Pemanenan Getah Karet (Heveabrasiliensi) dan Penentuan Kadar Karet Kering (KKK) dengan Variasi Temperatur Pengovenan di PT. Djambi Waras Jujuhan, Kab. Bungo, Jambi. Jurnal Anatomi dan Fisiologi. Jambi. https://doi.org/10.14710/baf.v22i2.7819
Ripkianto, Hargono, E., Kartika, D. (2022). Pengaruh Penerapan Program Keselamatan dan Kesehatan Kerja (K3) terhadap Produktivitas Tenaga Kerja Pembesian Balok Gerder pada PT. Wika Beton Pasuruan. Prosiding Seminar Nasional Aplikasi Teknologi Prasarana Wilayah Pasuruan.
Sari, Ikha Rasti Julia, Januar Arif Fatkhurrahman, Farida Crisnaningtyas, dan Moch. Syarif Romadhon (2021) FWHM Dimentional Analysis from Scattered Light Intensity Profile for Dry Rubber Content Determination in Natural Rubber. Jurnal Riset Teknologi Pencegahan Pencemaran Industri 9(1): 9.
http://ejournal.kemenperin.go.id/jrtppi/article/view/3463
Simatupang. F.H (2024). Pengaruh Penggumpal Bahan Organik terhadap kualitas Lateks. Skripsi. Program Studi Agroteknologi Fakultas Pertanian Universitas Medan.
Utomo, T. P. (2022). Rancang Bangun Proses Produksi Karet Remah Berbasis Produksi Bersih. Disertasi. Pasca Sarjana Fakultas Teknologi Pertanian Institut Pertanian Bogor. Bogor.
Wijaya. A dan Rachmawan (2023). Penggunaan Waktu dan Suhu yang Ideal pada Proses Pengeringan Kadar Karet Kering Lateks. Jurnal Agro Fabrica.Balai Penelitian Sungei Putih. Balai Penelitian Sungei Putih, Pusat Penelitian Karet. Medan. DOI:
https://doi.org/10.47199/jaf.v1i1.117
Wiyanto, (2020). Faktor-Faktor yang Mempengaruhi Kualitas Karet Perkebunan Rakyat Kasus Perkebunan Rakyat di Kecamatan Tulang Bawang Tengah, Kabupaten Tulang Bawang. Lampung. SKRIPSI. Fakultas Pertanian. Institut Pertanian Bogor. Bogor.
Yani, Mohamad, Andes Ismayana, Puji Rahmawati Nurcahyani, dan Derin Pahlevi (2022) Penghilangan Bau Amoniak dari Tempat Penumpukan Leum pada Industri Karet Remah dengan Menggunakan Teknik Biofilter. Jurnal Ilmu Pertanian Indonesia 17(1): 58–64.
Zuhra, Cut Fatimah (2021). Karet. Universitas Sumatera Utara : Medan. https://doi.org/10.22302/ppk.wp.v34i1.63
Copyright (c) 2024 Bursamin Bursamin (Author)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
