Penerapan Alat Bongkar Monoshock Model H-Frame untuk Meningkatkan Efisiensi dan Keselamatan Kerja

  • Windra Irdianto Universitas Negeri Malang
  • M. Ihwanudin Universitas Negeri Malang
  • Obaja Eden Sentosa Riyanto Universitas Negeri Malang
  • Monica Keisya Nurhabibah Universitas Negeri Malang
  • Erfaril Fiesta Pricilla Putri Universitas Negeri Malang
Keywords: Appropriate Technology, H- Frame, Monoshock Absorber, Physical Exertion, Occupational Safety

Abstract

The disassembly of motorcycle monoshock absorbers in micro, small, and medium-sized automotive workshops presents challenges related to high physical exertion, limited equipment, and occupational safety risks. This community service program aimed to implement appropriate technology in the form of an H-Frame monoshock disassembly tool equipped with a hydraulic–pneumatic power system to improve work efficiency and safety at Jack Skok Workshop, Blitar Regency, Indonesia. The implementation involved identifying the partner's needs, designing and fabricating the equipment, introducing the technology, providing operator training, developing standard operating procedures, and evaluating its effectiveness. The evaluation was designed to compare disassembly time, perceived physical exertion, the number of operators, ease of operation, and occupational risks before and after implementation. Based on feedback from the workshop owner, the H-Frame tool facilitated more stable and manageable spring compression while reducing dependence on the operator's physical strength. Operational assistance and occupational safety training also supported more systematic maintenance procedures. These findings indicate that the H-Frame technology has the potential to improve monoshock disassembly practices and support safer, more productive automotive workshop operations. Further quantitative evaluation is required to verify the magnitude of these improvements.

Downloads

Download data is not yet available.
Published
2026-09-30
How to Cite
Irdianto, W., Ihwanudin, M., Riyanto, O., Nurhabibah, M., & Putri, E. (2026). Penerapan Alat Bongkar Monoshock Model H-Frame untuk Meningkatkan Efisiensi dan Keselamatan Kerja. Jurnal Dehasen Mengabdi, 5(3), 419 -. https://doi.org/10.37676/jdm.v5i3.13414
Section
Articles